521 M6480

結構控制一 Structural Control (Ⅰ)

Department
Civil Engineering, Structural Engineering Division
Instructor
張家銘/Chia-Ming Chang
Category
Graduate Courses_Spring Semester 2026

Course Introduction

CIE7098 · 土木工程學系

結構控制一

Structural Control (I) — 114-2 Elective course (3.0 credits). Passive damping and seismic isolation systems for structural protection.

CIE7098 Curriculum Number 114-2 Semester 3.0 Credits 34 Seat Limit

✦ Course Information

Course title 結構控制一 / Structural Control (I)
Semester 114-2
Designated for College of Engineering · Graduate Institute of Civil Engineering, Structural Engineering Division
Curriculum Number CIE7098
Curriculum Identity Number 521EM6480
Class
Credits 3.0
Full / Half Yr. Half
Required / Elective Elective
Remarks Restriction: MA students and beyond. The upper limit of the number of students: 34.

Please respect the intellectual property rights of others and do not copy any of the course information without permission.

Class Section

Class Instructor Time Location
Chia-Ming Chang Wednesday 7, 8, 9 (14:20–17:20)

Course Description

Review of Structural Dynamics; Review of Earthquake Engineering; Energy Principle; Damping Modification Factors; Viscous Dampers; Viscoelastic Dampers; Design Code for Structures w/ Passive Energy Dissipators; Seismic Isolation; Design of Seismically Isolated Buildings

Course Objective

The objective of this course is to make student learn the fundamental understanding and background knowledge of passive damping and isolation systems for seismic protection of structures. Moreover, the associated design codes and design procedures are also provided in this course.

Course Requirement

  • Mechanics of Materials, Structural Analysis, Structural Dynamics
  • Student Workload (Expected weekly study hours before and/or after class): —
  • Office Hours: Appointment required. Note: If you need an office hour, please contact me via email first.

References

Designated reading

1

Dynamics of Structures, 2nd ed., Ray W. Clough and Joseph Penzien, McGraw-Hill, 1993

2

Dynamics of Structures: Theory and Applications to Earthquake Engineering, 4th ed., Anil K. Chopra, Pearson, 2011

3

Fundamentals of Structural Dynamics, 2nd ed., Roy R. Craig, Andrew J. Kurdila, 2006.

4

Design of Seismic Isolated Structures: From Theory to Practice, Naeim, F., and J. M. Kelly, John Wiley & Sons, 1999.

5

Passive and Active Structural Vibration Control in Civil Engineering, Soong, Tsu T., and Michalakis C. Constantinou, Vol. 345. Springer, 2014.

6

Passive Energy Dissipation Systems for Structural Design and Retrofit, Constantinou, Michalakis C., Tsu T. Soong, and Gary F. Dargush, Monograph Series, MCEER, Buffalo, NY, 1998.

7

建築物耐震設計規範與解說-內政部 113.3.1

8

Building Seismic Safety Council (BSSC). (2003). “NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures.” 2003 Edition, Report Nos. FEMA-450 and FEMA-451, Federal Emergency Management Agency, Washington, D.C.

References

Lecture Notes and Supplemental Materials

Grading

No. Item % Explanations for the conditions
1.HOMEWORK30%
2.Midterm Exam15%
3.Final Exam15%
4.Term Project40%

Grading Policy

NTU has not set an upper limit on the percentage of A+ grades.

Letter Grade System

NTU uses a letter grade system for assessment. The grade percentage ranges and the single-subject grade conversion table in the National Taiwan University Regulations Governing Academic Grading are for reference only. Instructors may adjust the percentage ranges according to the grade definitions. For more information, see the Assessment for Learning Section.

Progress

Week Date Topic
Week 1Overview; Review of Structural Dynamics
Week 2Review of Earthquake Engineering & Energy Equation
Week 3Invited Talk (TBD)
Week 4Viscous Dampers & Viscoelastic Dampers & Composite Damping
Week 5Tuned Mass Dampers
Week 6Special Energy Dissipation Devices (Inerter & TSD)
Week 7Seismic Design of Structures with Energy Dissipators (Design Code) & Visit NCREE
Week 8Numerical Modeling and Analysis of Energy Dissipation System (Using SAP2000/ETABS)
Week 9Midterm Exam
Week 10Structural Isolation Devices (FPB& LRB&HDRB)
Week 11Seismic Isolation Design Code for Buildings in Taiwan (Design Code) & Structural Design of Isolation System
Week 12Numerical Modeling and Analysis of Isolation System (Using SAP2000/ETABS)
Week 13Equipment Isolation Devices (Iso base & SRB)
Week 14Special Energy Dissipation Devices & Visit the Isolation Floor of NTU-CERB
Week 15Final Exam
Week 16Term Project Presentation

Attachments

Back to course list